| Categories | Alinco Brand Manuals, Alinco DJ Manuals, Alinco Manuals, Communications Manuals, Two-Way Radio Manuals |
|---|---|
| Document Type | Transceiver and Communications Radio Operator's Guide. VHF radio Instruction Manual in PDF. |
| Tags | Alinco DG-446 |
| Download File |
|
| Document File Type | |
| Publisher | alinco.com |
| Wikipedia's Page | Alinco |
| Copyright | Attribution Non-commercial |
ALINCO PRIVATE MOBILE RADIO DJ-446 Instruction Manual Thank you for buying this ALiNCO transceiver. This instruction manual contains important safety and operating instructions. Please read it carefully before using the transceiver. PRECAUTIONS &CAUTION Do not open the transceiver case or touch non-userserviceable components Moisture in the air will condense on the product when you Ii’ Beware of moisture condensation.
move it from a cold place to a warm place. Condensation will cause the unit to malfunction. If condensation forms on the unit, wipe or let dry. Do not expose the product to direct sunlight or heat sources. Also, avoid using the product in an extremely dusty or humid environment. For good ventilation, allow about 10 cm between the rear of the product and the wall. Do not place anything, which might spill on top of or over the product. reception, move the product away from the appliance. Do not yank the power cord from its outlets. Also, do not rewire the power cord with other extension cords. Such handling may damage or short circuit the cord. Ii’ If the product causes harmful interference to VCR or TV If the product ever emits smoke or strange smells. immediately tum it off and unplug the power cord. Then, contact your authorized dealer. Use a 13.8 V DC regulated power supply to operate this product. The transceiver must be grounded. Ii’ 2 CONTENTS BEFORE OPERATING THE TRANSCEiVER ยท 5 Attention Points to Note Before Transmitting Points to Note for Using an External Power Supply 4 BASIC OPERATION 4.1 Turning the Power On 4.2 Adjusting the Squelch 4.3 Adjusting the Volume 4.4 Setting the Frequency in the VFO Mode .Setting the Frequency 4.5 Memory Mode .CalIing Up a Memory ChanneL .Writing to a Memory ChanneL .Deleting a Memory Channel .Items that can be Stored in Memory 4.6 Call Mode ‘ ” .Changing the Call Channel Frequency 4.7 Receiving